How to install these parts?

ECU, Wiring, Sensors
 Reply
User avatar

How to install these parts?

By RSuave
- Mon May 24, 2010 3:41 am #196409 Can anyone tell me how to change the ignition coil and Ignition control module located in the distributor.
User avatar

By 93hatcheg
- Mon May 24, 2010 4:36 am #196421 i beleive the ignition coil is 2 phillips screws and idk about the control module. take the cap and rotor off your dizzy and look in there. the dizzy is pretty simple not many parts come off of it.
User avatar

By teal_dx
- Mon May 24, 2010 4:40 am #196423 ICM is held in by a couple screws as well. Just unhook the wires, remove & replace & hook the wires back up :thumb:

Be sure to write down the order of the wires first.
 Reply
Return to Chassis - Electrical