Page 1 of 1
12 constant
Posted:
Tue Nov 01, 2011 5:27 pmby JohnRM
Can someone show me, in visuals, where I can find a 12v constant in the car? I've searched that it's at the ignition switch and/or in the fuse box under the dash? I'm not good with these things, but if a picture was shown where to find it, I'll be okay from there. Thanks!
Posted:
Wed Nov 02, 2011 10:25 pmby Datsmart
Looks like connectors A and B are Hot all the time.
Posted:
Thu Nov 03, 2011 6:24 amby JohnRM
Awesome! this is great info. Now my next question is..what connector goes with A-E? I
Posted:
Thu Nov 03, 2011 1:53 pmby Datsmart
Take a trip to your local wrecking yard.
Should be able to find a connector and wire that fits the A - E outputs.
Posted:
Thu Nov 03, 2011 6:20 pmby JohnRM
Datsmart wrote:Take a trip to your local wrecking yard.
Should be able to find a connector and wire that fits the A - E outputs.
I'm actually wondering what the connector is called
Posted:
Fri Nov 04, 2011 3:45 pmby 1ACarlos
Thanks for the info
Posted:
Fri Nov 04, 2011 4:45 pmby Datsmart
Are you are asking what normally plugs into connectors A -E?
They are "Optional" connectors.
I believe OEM fog lights plug into connector D, not sure about the others. Basic non-option cars will not have anything in them.
Posted:
Fri Nov 04, 2011 5:57 pmby JohnRM
So I tried hooking up the option connector A to the cigarette lighter I bought. I made another connection for the ground and put it on a random metal bolt.
Hooked it up, a bit of sparks, then the bronze pin from the cigarette lighter heated up and melted off...
Can someone tell me what I did wrong? What steps am I missing here?
What I'm trying to do is make my cigarette lighter stay on at all times. Any help is appreciated!
Posted:
Fri Nov 04, 2011 9:26 pmby elrompetoto
JohnRM wrote:So I tried hooking up the option connector A to the cigarette lighter I bought. I made another connection for the ground and put it on a random metal bolt.
Hooked it up, a bit of sparks, then the bronze pin from the cigarette lighter heated up and melted off...
Can someone tell me what I did wrong? What steps am I missing here?
What I'm trying to do is make my cigarette lighter stay on at all times. Any help is appreciated!
. Get the yellllow wire from ur radio And connected 2 the positive side on the cig lighter bam power all the time
Posted:
Sat Nov 05, 2011 1:41 amby JohnRM
Solved it. I was over thinking what I was doing, haha. I got it to work!
I'll make a DIY for this later
