Civic EG

Posted: **Mon May 26, 2008 3:06 pm**

Who knows what all the necessary components are to install the OE Honda cruise control?
Maybe someone has some pics of the engine bay were the actual thing is installed?
So I know what to look for when buying

Posted: **Mon May 26, 2008 4:05 pm**

You'll need the following:
-the cruise control unit
-the main switch
-set/resume switch
-the cruise light on the cluster (if you want to know if its on)
-Actuator assembly (on engine bay)
-need to check if your clutch switch and your brake switch are working properly
-wires
-1 10A fuse and 1 15A fuse for the fuse box
- the manual diagram so you can wire up everything.

I have a friend who did this his Accord, he went to a junkyard and found a totaled one and took everything and from what i can remember this is all he took. The only problem he had was wiring it, he totally suck at that, other than wires everything else was just plug and play.
I'll see what else I can find...
:thumb:

[/list]

Posted: **Mon May 26, 2008 9:14 pm**

I have a a few things for cruise if you need it Stefan

Posted: **Tue May 27, 2008 12:03 am**

Cool, what do you have?
Could you send me a PM, haven't talked to Matt in a while either, how's he been?

Posted: **Tue May 27, 2008 1:04 am**

hes good, I will pm yea :0)

Posted: **Tue May 27, 2008 3:32 pm**

i just put a vti steering wheel on coupe so i actually have everything. its all usdm. it all works fine too

Posted: **Tue May 27, 2008 3:34 pm**

Well, I have a MOMO steering wheel, and I don't feel like putting in the stock steering wheel... is there another way with stock components?

Posted: **Wed Sep 17, 2008 4:14 am**

Did you ever complete the install? I am going o be doing this install soon.

Posted: **Wed Sep 17, 2008 11:30 am**

Nope, never did it.

Posted: **Thu Sep 18, 2008 1:17 am**

stefan wrote:Well, I have a MOMO steering wheel, and I don't feel like putting in the stock steering wheel... is there another way with stock components?

A switch is just a switch. Whether it's OEM or radio shack. Nothing's stopping you from buying the proper type of switches, cutting some holes in a blank pop-out panel ie the blank where the cruise control buttons go, and mounting/wiring them in.

That's what I plan to do. Someday... I don't like the JDM wheels and I certainly don't want the USDM wheels with the SRS.

Posted: **Thu Sep 18, 2008 1:23 am**

Mine has been acting up. Sometimes I'll engage the CC with the button on the dash and then set my speed and she works no problem. Other times I'll engage it on the dash and I push the "set" button and it doesn't activate. I'll continue pressing it for a few minutes and eventually it'll set. Could this be a switch problem on the steering wheel or a component under the hood?

Anyone encountered/fixed this problem?

Posted: **Fri Sep 19, 2008 12:44 pm**

suspendedHatch wrote:
stefan wrote:Well, I have a MOMO steering wheel, and I don't feel like putting in the stock steering wheel... is there another way with stock components?

A switch is just a switch. Whether it's OEM or radio shack. Nothing's stopping you from buying the proper type of switches, cutting some holes in a blank pop-out panel ie the blank where the cruise control buttons go, and mounting/wiring them in.

That's what I plan to do. Someday... I don't like the JDM wheels and I certainly don't want the USDM wheels with the SRS.

Ah, okay, I was under the impression that the buttons were integrated in the steering wheel...

Posted: **Fri Oct 03, 2008 1:33 am**

how would you go about wiring a switch to activate cruise?
i have all components but activation buttons.

Civic EG

I need a little help on OEM cruise control

I need a little help on OEM cruise control