Civic EG

So I did the rear disc conversion with the trailing arms and LCAs from a 91 crx si...I'm planning to go to an eg EX rear disc setup..will the LCAs from the crx si work with the EG EX setup?

i think they have a different mounting design for the lca in the rear. its like the itr. not sure if it fits the car but i know it doesnt fit our suspension

They should work, same part number...

http://store.skunk2.com/suspension-tuni ... s-788.html

HagerSol wrote:They should work, same part number...

http://store.skunk2.com/suspension-tuni ... s-788.html

this is wrong. they do fit the body and all but some crx's had the cup style lca. just like thr itr.

our civics use the fork style.

some crx's used the fork style too. im not sure on the years

88 CRX is the only year ( that i can remember) that came the ITR style LCA's and yes they will work.

I thought I had read that somewhere else too about the 88 LCA

i had like 2 or 3 sets at one point.

but will work, anyways 88 CRX, (maybe JDM EF's too?) JDM EG, JDM integra's and USDM ITR's have this style.



will look like this

CR-V's are similar but IIRC they are longer for their wheel base

So the 88 crx or the 91 crx si will work?

kt95CiviCDX wrote:So the 88 crx or the 91 crx si will work?

yup depending how your rear shocks look like. the 91 should look like your stock LCA's with mounts for a sway bar. or you can just use your stock LCA's also.

Thanks for the info asianrob!