Bench bleeding mc
Posted: Mon Jun 14, 2010 6:23 amIf I have had disconnected the lines from my mc does this mean I need to bench bleed my mc now ?
Page 1 of 1
Posted: Mon Jun 14, 2010 6:23 amPosted: Mon Jun 14, 2010 7:03 amI would say so as your pressure in the lines is released.
Posted: Mon Jun 14, 2010 4:43 pmMost Def. you need to. Any time you remove any brake line...you need to bleed.
Posted: Tue Jun 15, 2010 6:04 pmi 'bench bleed' the mc while its in the car.
1-jack up the rear of car until the mc is level.
2-make sure plenty of fluid is in reservoir
3-put fingers over the holes for the brake lines and have someone slowly pump the brake pedal until pedal pressure comes up.
4-connect brake lines.
5-enjoy firm brakes.
1-jack up the rear of car until the mc is level.
2-make sure plenty of fluid is in reservoir
3-put fingers over the holes for the brake lines and have someone slowly pump the brake pedal until pedal pressure comes up.
4-connect brake lines.
5-enjoy firm brakes.