Civic EG

I have a 92 civic eg, i bought it with a disc brake swap and i wanna buy new rotors etc, but i dont know if they are from a civic si, del sol , or integra. same with the front brakes.Any suggestions?.....but i think they have a wire for abs cause there is a wire just hanging from the trailing arm........... and if change the front to some tegs, would i have to change the pp valve?


Thanks!

Trailing arms are universal. The rotor size is what you want. Use a measure to find out. If you change the fronts, it is only highly recomended that you swap the valve as well. It is not required. That is if you "pp" valve is the proportioning valve.

all rear trailing arms are the same.

even the drums have same trailing arms.

Thanks! so if chaned my front brakes to ls or gsr brakes would it make a differnce? with stock porpotioning valve

as far as the front brakes go yea. it should

the rear trailing arms you can just change out the drum to disc without having to change out the whole arm... but either way same trailing arms tho