Page 1 of 1

PLEASE HELP !!15s

PostPosted: Tue Jun 09, 2009 7:12 am
by honda encore150>
hi guys

please help im planing on puting 15s on my eg sedan.

my problem is that im not sure if i should lower it (40mm) in the front ONLY or keep the height STANDARD...

please advice

thanks

honda

south africa 8)

PostPosted: Tue Jun 09, 2009 11:56 am
by Vti93T
slam it..if you leave it stock with 15's then there is going to be major wheel gap

PostPosted: Tue Jun 09, 2009 12:21 pm
by kir1
definitely lower it, id go beyond 40mm it sometimes looks like it hasnt been lowered at all if you just do 40

PostPosted: Tue Jun 09, 2009 12:37 pm
by teal_dx
why only considering lowering the front of the car?

PostPosted: Tue Jun 09, 2009 2:06 pm
by honda encore150>
thanks for the reply guys much apreciated

how low should i go in the front ?

im going to put new shocks aswell ( not shortend shocks )

i had 17s b4 with a 40mm all round .the ride was shit so i put eveything
back to standard ...with 15s whld the ride be any better.??

will post some pics of my baby soon its at da panel shop at tha mo.....

[/img]

PostPosted: Tue Jun 09, 2009 2:13 pm
by honda encore150>
i want to lower the frnt only

coz i carry loads often

PostPosted: Tue Jun 09, 2009 6:19 pm
by egsedanguy
mines slamed on 15in rims. i also have like 150lbs in the trunk with my 2 12in subs and boxes and amps. just drop the front like 2in-3. and the rear like 2- 3 in. and youl be fine. i dont think you will carry that much weight unless its bags of concret or like 3 dead bodys lol.

PostPosted: Wed Jun 10, 2009 6:28 am
by honda encore150>
haha

the thing is i have these cheap after market springs

what do you mean by 2 -1 etc

PostPosted: Wed Jun 10, 2009 4:52 pm
by egsedanguy
1 inch 2 inch 3 inch 4 inch. lol i got maxspeed coilovers on mine with 250000 miles on the shocks and its slamed. rides a lil bumpy but on the freeway it feels good. some the cali roads here are fucked up. but just lower it to what you feel is right. put on the rims, lowere it and if you like it leave it there, if you want lower well, go lower :thumb:

PostPosted: Sat Jun 13, 2009 1:41 pm
by Mr Rattles
when i fitted my 15inch mags on i never lowered the car and she looked like a 4x4 pick up haha

then i put a 40mm lowering kit on and brought it down
i can carryd 4 other people and have no problems

i would recommend the kit that im fitting now front =60 and back = 40

PostPosted: Mon Jun 15, 2009 6:27 am
by honda encore150>
thanks ratlles

what springs are you using ?

i have bought the razor 40mm.set

do u have any pics so i can see how it will look .with the 60 , 40 drop.

thanks bro

PostPosted: Sun Jun 21, 2009 1:49 pm
by Mr Rattles
honda encore150> wrote:thanks ratlles

what springs are you using ?

i have bought the razor 40mm.set

do u have any pics so i can see how it will look .with the 60 , 40 drop.

thanks bro


hey bro
i have a koenic kit
razor is a great kit and i would fit it if i were you
you can find pics in the sedan section under my name