Page 1 of 1
Antenna removal

Posted:
Wed Oct 14, 2009 12:34 am
by Crmnil
hi everyone i am getting my hatch sprayed and i am removing moldings and windows to make it easier for the spray painter does anybody know how to remove the antenna from the roof?
i have tried undoing both screws and pulling it a little bit but i do not want to break anything so help would be appreciated thanks.

Posted:
Wed Oct 14, 2009 12:42 am
by ikon
the antenna cable goes down through the a pillar then to the radio. just cut it off at the top unless u wanna keep it. then u have to pull it through but its taped to all the wires rinning through that pillar. kind of a bitch.

Posted:
Wed Oct 14, 2009 1:46 am
by teal_dx
I took the black plastic cover off and was able to push the antenna down into the hole a little bit for painting. Then pulled it out after paint and it was good to go


Posted:
Wed Oct 14, 2009 1:51 am
by Chance
x2 ^^ I did the same thing as Teal!


Posted:
Wed Oct 14, 2009 3:11 am
by ikon
U guys r so much less destructive than i am.


Posted:
Wed Oct 14, 2009 8:31 am
by Crmnil
ohh yeah that's a better idea ill remember not to take advice from ikon

jk thanks heaps guys for the advice much appreciated

Posted:
Wed Oct 14, 2009 11:24 pm
by Greasedmonkey
ive replaced my antenna...its not that hard to take out, its putting it back in thats a bitch. I would suggest doing what Teal said. Much easier.

Posted:
Fri Oct 16, 2009 6:02 pm
by Sandman9962
yeaa..i bought my car and the antenna was broken off so i picked one up at the junkyard but i have no clue as to where to start...how do you actually do it?