Page 1 of 1
My first civic sedan
Posted:
Sat Jan 15, 2011 11:53 pmby neo27ny
I just picked up a '93 civic sedan lx for $500. Car needs alot of maintenance but in good shape otherwise. It needs front end work due to the previous owner hitting a deer. I just picked up a bumper from the local junkyard. My question is what bolts do I need to install it. I see it needs 5 across the top, one one each fender and two underneath? I am having trouble finding what size they are, I went onto majestic honda and they have a diagram but I can't see that it shows which bolts go where. Any help appreciated, thanks.
Posted:
Sun Jan 16, 2011 3:48 amby Tugboat
delete
Posted:
Tue Jan 18, 2011 2:54 pmby neo27ny
why delete?
Posted:
Tue Jan 18, 2011 9:20 pmby asianrob
as far as the ones on the side goes. id replace them with 11mm bolt washers and nuts.
the ones on top are 10mm but 10mm is not the correct bolt for it. they are huge phillip head screws.
the 2 on the bottom should be 10mm
Posted:
Tue Jan 18, 2011 11:59 pmby fcb civic
10 mm
Posted:
Wed Jan 19, 2011 1:29 amby Tugboat
neo27ny wrote:why delete?
my post, i read after i wrote stuff therefore it was pointless so a mod would delete it xD
Posted:
Wed Jan 19, 2011 2:54 pmby neo27ny
So I can not replace the 5 across the top with regular bolts? I know what you are talking about(them being big headed screws) I remember seeing them on my crx when I did the front bumper on that. I'll do a search, but does anyone know of a chart or list stating the bolt sizes including thread size and pitch?
Posted:
Sat Jan 29, 2011 11:32 pmby neo27ny
I got it figured out.