Page 1 of 1

Engine Swap, What do?

PostPosted: Tue Apr 26, 2011 5:52 am
by CamperCarl
I need an engine for cheap, I am looking for something that will take minimal effort to swap but preferably with v-tec and more HP. What Engines can I put in my car without having to replace much. If possible what engine's can I swap my transmission to?

Facts
-1995 Sedan Lx
-D15B7
-Both with 230K on them
-Burns oil, anything over 4k RPM leaves a cloud of blue smoke
-Built in Ohio
-Clutch and gears are in great condition

If you guys could through out a few sites or resources you have used that would be greatly appreciated.

sorry for being a noob, but got to start somewhere.

Image[/img]

PostPosted: Tue Apr 26, 2011 6:55 am
by ceelx
if you have d15b7 ( not b15d7 :D ) you can minime to do.
this option will be very cheap for you and give you some HP

PostPosted: Wed Apr 27, 2011 9:39 pm
by stussy_legend
u mean D15B7, right......hahah
putting a D16Z6 or D15B head(Mini me) should be easy enough for u as u dun need to go thru all the wiring effort.

PostPosted: Thu Apr 28, 2011 2:23 am
by d-mon
d16y8 head mini-me will be easier 'cuz you can use your b7 distributor

sounds like your rings are going, better do a compression check.

PostPosted: Thu Apr 28, 2011 2:56 am
by CamperCarl
d-mon wrote:d16y8 head mini-me will be easier 'cuz you can use your b7 distributor

sounds like your rings are going, better do a compression check.


Did one a few weeks ago, came back with 200-200-190-180

Car idles at 500-750rpm after being driven. Cold Start is 1000-1500rpm till warm.

I figured it was the rings, but haven't had anywhere to pull the head off and look at the cylinder walls.