Quiet Exhaust

General engine questions/issues that aren't specific to the other categories
 Reply
User avatar

By asianrob
- Sat Aug 11, 2007 1:48 pm #19428 spoon N1!! haha j/k that mother fucker is loud! stock FTW!!! ES tuning is quiet too if you have a resonator etc...fuck it no muffler! :lol:
User avatar

By Darb 2k
- Fri Aug 24, 2007 5:58 pm #21012 About to get the Apexi WS2.

Does anyone have it with a test pipe?

Im wondering if i should pick up a cat and replace my Test pipe. Dont want it to be raspy.
User avatar

By Gorveatt
- Fri Aug 24, 2007 11:26 pm #21074
Darb 2k wrote:About to get the Apexi WS2.

Does anyone have it with a test pipe?

Im wondering if i should pick up a cat and replace my Test pipe. Dont want it to be raspy.

I had it with a delete pipe for a while was not raspy at all.. still very very quiet exhaust.
User avatar

By chnzgoofball
- Fri Aug 24, 2007 11:42 pm #21078
Gorveatt wrote:
Darb 2k wrote:About to get the Apexi WS2.

Does anyone have it with a test pipe?

Im wondering if i should pick up a cat and replace my Test pipe. Dont want it to be raspy.

I had it with a delete pipe for a while was not raspy at all.. still very very quiet exhaust.


really.... hmmm.... :eh:

By B18bubble
- Fri Nov 02, 2007 11:54 pm #28344 I'm a little late jumping in but I run an Apexi WS2 without Cats and it's still one of the quietest systems out there...I'm more than happy with it and you can still here it when you get on it....just not when you need to be quiet...like around 5am coming home from work..lol
User avatar

By suspendedHatch
- Mon Nov 05, 2007 2:10 am #28537 Well no exhaust is more quiet than stock. But if you meant to say that you want a performance exhaust that is reasonably quiet then I would recommend custom.

For instance, I have a 4-2-1 DC header, 2 inch Magnaflow high flow cat, Two 2.25 inch Magnaflow resonators totalling about 46 inches for the straight section, 2.25 mandrel bends (I bought three 90 degree bends and a 45 degree bend), 18 inch Magnaflow muffler (I measured and that is the longest that will fit).

Cheap, sleeper, 2.25 constant diameter from the cat back, straight through, and quiet.
User avatar

By Rice2NiceEG
- Fri Dec 14, 2007 12:56 am #33665 let's not forget about rs*r. i dont have one, but plan on getting it for my coupe or crx. Their Ex-Mag exhaust sounds amazing(i think). it's not an exhaust you see every other either...
User avatar

By Gorveatt
- Fri Dec 14, 2007 1:31 am #33670
Rice2NiceEG wrote:let's not forget about rs*r. i dont have one, but plan on getting it for my coupe or crx. Their Ex-Mag exhaust sounds amazing(i think). it's not an exhaust you see every other either...


That was my original choice, but i couldn't find it for a good price at the time.
User avatar

By ohDirka
- Fri Dec 14, 2007 1:50 am #33677
Rice2NiceEG wrote:let's not forget about rs*r. i dont have one, but plan on getting it for my coupe or crx. Their Ex-Mag exhaust sounds amazing(i think). it's not an exhaust you see every other either...


I agree Joe rs*r's sound damn good
User avatar

By asianrob
- Fri Dec 14, 2007 3:58 am #33691 Type-R muffler or S2000 muffler bigger flow than stock with the stock look
User avatar

By 0p71mu5pr1m3
- Fri Dec 14, 2007 4:55 am #33698 RSX-S, Type R, and S2000 Mufflers all sound great and pretty queit on custom mandrel bent systems. When I get my exhaust done I'm going with one of those three.
User avatar

By asianrob
- Fri Dec 14, 2007 5:53 am #33707 i was wanting feed back on an RSX muffler i havent heard it yet but i heard that our RSX-S the kouki or late model RSX-S had the same muffler as the ITR the one with some sort of device in the muffler straight from honda... i was wanting to hear some one with that muffler..

By kurtiis
- Fri Mar 06, 2009 10:19 pm #101105 Which exhaust would open up the piping but still keep it STOCK looking and STOCK sounding?>
User avatar

By suspendedHatch
- Sat Mar 07, 2009 11:35 pm #101281 Well in that case just get a used factory Integra exhaust and have a muffler shop cut it to fit. They're all the same except for the length of the straight pipe.
 Reply
Return to Engine - General