Page 1 of 1
D16 N/A rods
Posted:
Mon Jul 05, 2010 4:39 amby berg89
Im doing n/a with my d series, an i was wondering if my stock rods could handle it? My buddy says they can but i wanna be safe.
Posted:
Mon Jul 05, 2010 3:32 pmby d-mon
stock d16 rods can handle more power than a N/A d-sereies is capable of.
d15 rods are thinner but still strong enough (and lighter).
Posted:
Mon Jul 05, 2010 4:44 pmby Classiccarsrule85
d-mon wrote:stock d16 rods can handle more power than a N/A d-sereies is capable of.
d15 rods are thinner but still strong enough (and lighter).
x2 but if you want to be safe just grab some slightly used ls rods and put them in cheaper solution but yea the stock d sereis rods will handle thepower youd be making with the n/a
Posted:
Mon Jul 05, 2010 5:20 pmby berg89
Ok sweet. Thanks you guys.
Posted:
Mon Jul 05, 2010 8:57 pmby asianrob
i'm pretty sure you can use D16A rods they are far stronger than z6 or y8 rods.
Posted:
Sun Oct 24, 2010 2:13 pmby d16drey
sure you can use the d16a rods..but change the connecting rod bolts to a aftermarket one..like arp connecting rod bolts..
Posted:
Mon Oct 25, 2010 1:45 amby Greasedmonkey
d16drey wrote:sure you can use the d16a rods..but change the connecting rod bolts to a aftermarket one..like arp connecting rod bolts..
x2 ARP rod bolts ftw!