Civic EG

Posted: **Fri Mar 12, 2010 2:25 pm**

I was wondering if a 2000 ex tranny would fit a 97 ex motor cuz my bearing is bad an want to change it an found 1 for 100 buck an want to sent the other one to get fixed..advice would be helpful

Posted: **Fri Mar 12, 2010 3:22 pm**

yup. both motors are D16Y8's.

Posted: **Fri Mar 12, 2010 3:24 pm**

All 1988-2000 D Series transmissions are compable with eachother, You can bolt a 2000 d16y8 to a 1988 cable d series tranmission.

If you want it in your EG, Any 1992 to 2000 d series transmision will work. The 1996 to 2000 D Series Transmissions(the S40's) have stronger internals then a 1992-1995(s20) Transmission.

Also when you pick it up, look by the differental and make sure it say "B000" that means its an EX Short geared transmission. If it has "A000" it is a longer geared transmission.

Posted: **Fri Mar 12, 2010 3:26 pm**

chrono404 wrote:if you want it in your EG, Any 1992 to 2000 d series transmision will work. The 1996 to 2000 D Series Transmissions(the S40's) have stronger internals then a 1992-1995(s20) Transmission.

he is right, i have heard the same thing, the later model d trans are supposed to be stronger :thumb:

Posted: **Fri Mar 12, 2010 7:12 pm**

Thanks alot guys

Posted: **Mon Mar 15, 2010 3:54 pm**

just the shift forks are different, other parts are the same.
btw, if you are worried about bending or breaking shift forks, you should probably be driving an auto.

Posted: **Tue Mar 16, 2010 12:49 pm**

d-mon wrote:just the shift forks are different, other parts are the same.
btw, if you are worried about bending or breaking shift forks, you should probably be driving an auto.

lol arent the shift forks tig welded like a hydro b trans?