Page 1 of 2
ITR DC2 JDM steering wheel into an EG hatch
Posted:
Tue May 20, 2008 8:08 pmby chester_LP
Hi mates. I wanna know this please, will the DC2 JDM steering wheel fit into the EG hatch with no modification?? Just plug n play? And how to put the horn button in the wheel functional? Because I'm waiting one of this from Japan, genuine JDM item
That steering wheel:
Posted:
Tue May 20, 2008 8:12 pmby Gorveatt
1) remove old wheel
2) put on new wheel
3) enjoy
Posted:
Tue May 20, 2008 8:22 pmby egchick
hahahaha^^^^
Posted:
Tue May 20, 2008 8:54 pmby LowTEC-Derbo
your horn will require a metal strip to contact the positive brass on the back of the wheel and then wired to the horn wire on the SRS loom.
Posted:
Tue May 20, 2008 11:36 pmby chester_LP
Thanks people!
Posted:
Tue May 20, 2008 11:58 pmby Graham
Depends on what model Civic you have - i put a dc2 airbag steering wheel into a non-airbag eg, i used the wee srs connector plug thing that sits behind the wheel from the dc2 aswell and it all works perfectly
If you're putting a non-airbag dc2 wheel into a non-airbag eg it will go straight on without any modification
If its a non-airbag wheel into an eg with airbags you'll need the wee metal strip as Derek said
Posted:
Wed May 21, 2008 12:01 amby chester_LP
My ride is an EG4 '92 and it don't have airbag. So it's just plug n play!
Posted:
Wed May 21, 2008 6:54 amby Bouli
oooow nice picture you have there
Putting on the steering wheel is a breeze
Posted:
Wed May 21, 2008 12:31 pmby chester_LP
Posted:
Tue May 27, 2008 11:02 pmby marvinp8700
what is this trickery you speak of that will allow my new vti horn to work?
Posted:
Wed May 28, 2008 12:15 amby Graham
Is the wheel an airbag wheel? Did you car have an airbag beforehand?
v
Posted:
Thu May 29, 2008 3:48 pmby marvinp8700
its a non airbag wheel and my old one was
Posted:
Thu May 29, 2008 5:31 pmby Graham
If you take your steering wheel off you'll have a black SRS thing thats held in place with 3 screws - you dont need that bit anymore so take it off and in place of that you need the wee metal piece. The plug on the indicator stalks for the horn is at the bottom, its just a spade connector. The wee metal piece joins that to the contact ring on your non-srs steering wheel. You can get the bit from either a junkyard out a car that has no airbags or Honda sell it too, its not expensive at all!!
hj
Posted:
Fri May 30, 2008 2:10 pmby marvinp8700
kick-ass
Posted:
Wed Oct 15, 2008 8:45 pmby Dippin_EG
that interior is fucking awesome... i wish i could find that shit for a cheap price.
