- Mon Jan 04, 2010 5:39 am
#165620
Well I have a little update nothing major but still an update noetheless. Anyway I had a problem with my right rear wheel being toed out, I did not want to go anyfrother with my rebuild untill I figured this problem out. anyway after checking everything underneath the car and seeing that my rear toe adjustment was maxxed out to try and compensate for the toe out I relized I had a problem and wanted to make sure it was suspension related and not like a body problem. So I went to my dads yard and grabed another rear disc conversion, came back to the shop and took the right rear off and compared them together and could not see a problem. So I installed the new one anyway and now the problem is gone, I have plenty of toe adjustment now and the wheel is straight so I can continue with the build. I will have pics up in a day or 2. I will be taking the rear suspension out again in a week or 2 to sandblast everything and install my passwordjdm.com rear spherical bearing kit and prothane bushing kit. Again I will have pics of the whole thing in a day or 2.
- Mon Jan 04, 2010 5:45 am
#165621
Oh also I forgot that I made harnesses and ran everything for the jdm fogs to the jdm fog switch and removed the washer bottle and intake silencer. If you are wondering why I am putting fog light harness's in when I am stripping it to have the body redone then I will tell you. I want to have all electical components installed so that when I start my wire tuck I can put it all in the main harness and not have to crack it open later and run wires in it for somthing I forgot to do while I had it all apart.
- Sun Jan 10, 2010 2:58 am
#167236
Well just a little update, I bought a sandblast machine and a energy suspension hyperflex master kit. I have been blasting and painting the pieces that I put the bushings into, I am gonna go to the shop tomorrow and finish it up and take some pics so check back tomorrow night.