Civic-EG.com Forum 3.3.1

- Mon Aug 04, 2008 3:26 pm #64580 Thanks man, a mate also got these pics which i havent put up yet






And a action shot....

94' civic eg B16a2 swapped motor
94' civic eg B16a2 turbo'd 340whp 285ftlb torque
94' civic eg B16a2 Built n/a 200bhp 130ftlb torque
94' civic eg B18c-R SOLD
96' Integra type R build SOLD
02' EP3 civic type R build in progress

- Tue Aug 05, 2008 5:10 pm #64794 awesome car that looks like southport am i right?

- Fri Aug 08, 2008 10:37 am #65160

awesome car that looks like southport am i right?

The above pics are in formby, not far from southport though

94' civic eg B16a2 swapped motor
94' civic eg B16a2 turbo'd 340whp 285ftlb torque
94' civic eg B16a2 Built n/a 200bhp 130ftlb torque
94' civic eg B18c-R SOLD
96' Integra type R build SOLD
02' EP3 civic type R build in progress

- Sun Aug 10, 2008 9:29 pm #65338 Today i went to Andys to flat and polish my replacement wing, as it was bubbling and slightly the wrong colour red.

PICS




So, firstly i helped andy flat and polish the wing




Colour difference between the new and old



Whilst fitting the new wing, i replaced the arch liners as they were all worn from the big wheels and charge piping from the turbo.

PICS




Wing fitted





I also (with andys help) polished the roof, as it was looking abit sorry for itself

PICS



So there you have it, my not very exciting but necessary day

94' civic eg B16a2 swapped motor
94' civic eg B16a2 turbo'd 340whp 285ftlb torque
94' civic eg B16a2 Built n/a 200bhp 130ftlb torque
94' civic eg B18c-R SOLD
96' Integra type R build SOLD
02' EP3 civic type R build in progress

- Mon Aug 11, 2008 12:12 am #65346 LOL, you said wing and I was all confused because you were showing pics of a fender. Then I remembered where your from. Made a world of difference then.

Imma have to get used to this soon or Imma loose it.

1986 Nissan 300zx
1980 Kawasaki KZ650
2014 Kawasaki Ninja 300

- Mon Aug 11, 2008 4:15 pm #65405

LOL, you said wing and I was all confused because you were showing pics of a fender. Then I remembered where your from. Made a world of difference then.

Imma have to get used to this soon or Imma loose it.

In that case to make the translation correct:

I fitted the new fender as the old fender was in poor condition

94' civic eg B16a2 swapped motor
94' civic eg B16a2 turbo'd 340whp 285ftlb torque
94' civic eg B16a2 Built n/a 200bhp 130ftlb torque
94' civic eg B18c-R SOLD
96' Integra type R build SOLD
02' EP3 civic type R build in progress

- Mon Aug 11, 2008 4:54 pm #65413

1986 Nissan 300zx
1980 Kawasaki KZ650
2014 Kawasaki Ninja 300

- Mon Aug 18, 2008 11:35 pm #66624 Just updating the thread with some new and old pics i found on the comp







PICS from Haigh Hall show

94' civic eg B16a2 swapped motor
94' civic eg B16a2 turbo'd 340whp 285ftlb torque
94' civic eg B16a2 Built n/a 200bhp 130ftlb torque
94' civic eg B18c-R SOLD
96' Integra type R build SOLD
02' EP3 civic type R build in progress

- Sat Aug 23, 2008 5:10 pm #67121 Another small update, ive been banging on for a while now about removing the TYC clear headlamps and going back with the OEM stanley headlamps as the pattern on the glass doesnt match the ambers, plus i fancied putting the OEM clear corners back on for a change. Sad, i know

My OEM ones were dirty and stained inside, i decided to open them using the oven trick......but i melted one . So i set off to a mates to get some mint condition spares he had. £10 and the deal was done, i also got the OEM corner indicators (all for £10 )

When i got them they were filthy, so a clean was in order..(excuse the car being filthy)




After some sugar soap and abit of scrubbing they were clean



For reference this is how the TYC's were




New OEM headlamps installed with ambers




New OEM headlamps installed with OEM clear corners





Difference in the two..



I definately prefer the OEM headlamps so they will be staying, i'm undecided on the amber or clear corners though, but i'll leave the clears on for the time being for a change!

This is my inspiration





Spoon splitter is going to have to be ordered now

Your opinions guys??

94' civic eg B16a2 swapped motor
94' civic eg B16a2 turbo'd 340whp 285ftlb torque
94' civic eg B16a2 Built n/a 200bhp 130ftlb torque
94' civic eg B18c-R SOLD
96' Integra type R build SOLD
02' EP3 civic type R build in progress

- Sun Aug 24, 2008 12:36 am #67138 I loves me a red hatch

- Tue Aug 26, 2008 9:50 pm #67405 Some new pics, courtesy of flybikeslee and gsung







And a few pics of a recent drive into wales with a few others!





Thanks for looking guys, comments welcome as ever as i'm still trying to decide on clear or amber corners!

94' civic eg B16a2 swapped motor
94' civic eg B16a2 turbo'd 340whp 285ftlb torque
94' civic eg B16a2 Built n/a 200bhp 130ftlb torque
94' civic eg B18c-R SOLD
96' Integra type R build SOLD
02' EP3 civic type R build in progress

- Wed Aug 27, 2008 12:40 am #67411 The Stanleys are cool but the amber corners just set the car off even more. I think the Stanleys make the car appear somewhat not as nice. I think it's the contrast. But all up to your tastes I guess. I'd prefer the amber corners on your car, will make the front end a little more special than it already is

- Wed Aug 27, 2008 4:35 pm #67480 I think your car is absolutely beautiful! Love the wheels with the car..mmm nice hatch

- Fri Sep 05, 2008 2:21 pm #68473 Are those OEM wind deflectors? they look different.

- Fri Sep 05, 2008 3:05 pm #68482 I would defo say stick with the ambers, they are gorgeous and set the car off nicely.

I have a set ready to go on my EG once all the paint is done.

I love your car, first saw the full write up on CSC, nicely done mate, an inspiration!