- Sat Oct 09, 2010 4:42 am
#217641
Sup guys im trying to swap my d15b7 engine for a d15b vtec...now my question is can i swap a jdm d15b and still use my stock engine harness on the jdm d15b engine?
- Sat Oct 09, 2010 4:46 am
#217642
you will need to wire vtec into your engine harness, or get an engine harness out of any 92-95 Civic Si or EX, or any 93-95 Delsol Si.
- Sat Oct 09, 2010 5:06 am
#217647
You can do that. You just have to get a VTEC ECU and then find a guide on how to do it. There are three pins going to the ECU that have to have wires added and then connected to various parts/plugs to make VTEC work. I don't remember how because wiring intimidates me so I had someone else do it for me.
EJ1STYLEN wrote:Oh ok i thought it would be a straight bolt on and just wire the vtec wire to the ecu...i guess its a hassle after all...lol
You can do that. You just have to get a VTEC ECU and then find a guide on how to do it. There are three pins going to the ECU that have to have wires added and then connected to various parts/plugs to make VTEC work. I don't remember how because wiring intimidates me so I had someone else do it for me.
Straight lines are for sissies.