G23 Swap

F20, F22, F23
 Reply
User avatar

G23 Swap

By 99cx
- Wed Mar 24, 2010 1:24 am #183262 After some research of the F series swap i came across the G23

"G23" has an F23 block, H22 head, K-series pistons, and a B-series transmission !!!

Thats just insane!!!
how many people here have tried this set-up?

after i get an F swap going i plan on trying this out!
User avatar

By flyinryan122
- Wed Mar 24, 2010 1:32 am #183263 Two locals here in utah tried it. OUCH! they obviously eff'd up cause niether of them made it ten minutes
User avatar

By flyinryan122
- Wed Mar 24, 2010 1:41 am #183267 hahaha not sure. i was trying to find the thread about it, but apperently the OP's had the admins of our local site delete it.

They didn't seem to know much about engine building, and did it from thier own garage
User avatar

By flyinryan122
- Wed Mar 24, 2010 2:00 am #183277 I found that dudes thread, or part of it atleast,

This is what he said

''Thank you very much but I cannot take credit I saw a fellow member on honda-tech doing this build then decided it was a good option to combat the price of a k20 swap.. later the build I based mine off of had an article in importuner.. It has alot of hype it is just a ghetto swap I would only recommend if you already have the parts.. after all said and done I think i would settle for a built turbo singlecam it would have been alot more straight forward this trial and error things it really annoying''
User avatar

By forcefedEG
- Wed Mar 24, 2010 3:42 pm #183401 seen this in honda tuning, they had a HUGE write up on it (I think it was honda tuning at least :hehe: ), but it is a banging ass setup for a h2b or f2b or in this case a g2b, the nice thing is they did it with most stock honda parts, with is great for reliability... but it was kinda pricey chasing down all the parts to do it, if you got money to play with id say go for it...

By valley.performance
- Mon Apr 19, 2010 1:58 am #188486 I like the sound of this.........

Can somone list all the bits from the different engines that are required.

So what are we talking......

F23 Block
H22 head
K20a pistons
Rods?
headgasket?
B16/B18 transmission

What else guys?


Cheers,
Rhys
User avatar

By JUICE
- Mon Apr 19, 2010 2:02 am #188487
valley.performance wrote:I like the sound of this.........

Can somone list all the bits from the different engines that are required.

So what are we talking......

F23 Block
H22 head
K20a pistons
Rods?
headgasket?
B16/B18 transmission

What else guys?


Cheers,
Rhys


the k20 pistons go right to the F23 rods


the build....http://www.importtuner.com/tech/impp_0902_k24_vtec_versus_g23_vtec_tech_knowledge/index.html
User avatar

By forcefedEG
- Mon Apr 19, 2010 3:52 pm #188559
JUICE wrote:the k20 pistons go right to the F23 rods


x2 they are both floating setups...
User avatar

By JUICE
- Sat Apr 24, 2010 3:31 am #189702 ^ I'm sure someone out there has swapped in one of those 5 bangers :lol:







but, speaking of G23's I came across this on CL today..

Honda G23 Short Block (Goshen)
Date: 2010-04-23, 9:54AM EDT
Reply to: see below

I have a G23 Short Block For Sale. It has Weisco K20 Pistons, Kaisen Speed Balencer Block Offs, Block is Very Clean The Pistons and rods are out of the bottom end right now I was running ACL Race Bearings I was going to put Differnt Bearings in It But I lost Interest the crank is in good shape, So its been sitting. I also Have A set of Crowler Stage 3 All Motor Cams that I can sell also. I am Willing to do some trading. I am looking for a set of 33" Tires, Suspension for an EG. Just let me know what you have Cash wise I will Take 700obo.

Call Or Text 376-0654
User avatar

By OleFolk
- Wed Sep 01, 2010 4:11 pm #211641 "Some people colloquially refer to an F-series block (found on Accords) with an H-Series head (found on Preludes) as a G-series engine. This combination of an Accord bottom end with a Prelude head has nothing in common with the actual G-series engine."

http://en.wikipedia.org/wiki/Honda_G_engine

edit: sorry 94_jdm_ferio I didnt see you posted that
User avatar

By ikon
- Wed Sep 01, 2010 7:08 pm #211677 i read it alot of custom work and hacking.... blocking and adding oil and coolant lines in the block. :?
 Reply
Return to F Series