Civic EG

I just got into the B-series business
I wanted to know from what car I need to buy parts to do the tune up.
oil, oil filter, spark plugs etc etc etc.
Thanks you guys I know I always get positive help from this site

if you have a b18c you need gsr parts
if you have a b18a/b you need LS/RS/GS parts
if you have a b16a2/a3 you need 96+DelSolVTEC or 99to00 si parts


ngk vpower or gpower plugs (if you got the bank for it go irridums)
ngk plugwires (personal prefrence)
pvc valve <- very over looked for a 3$ part
lucas injector cleaner
dist cap
dist rotor button
oil change with good oil and filter
*adjust your valves* <- cheapest gain in lost performance you can get

im sure ive left something out, but this is the basics

Sorry forgot to say that.
I have a b16

forcefedEG wrote:if you have a b18c you need gsr parts
if you have a b18a/b you need LS/RS/GS parts
if you have a b16a2/a3 you need 96+DelSolVTEC or 99to00 si parts


ngk vpower or gpower plugs (if you got the bank for it go irridums)
ngk plugwires (personal prefrence)
pvc valve <- very over looked for a 3$ part
lucas injector cleaner
dist cap
dist rotor button
oil change with good oil and filter
*adjust your valves* <- cheapest gain in lost performance you can get

im sure ive left something out, but this is the basics

Damn thanks again for the info.
I want to adjust the valves but idk if I should take it to a shop or do it myself.

check the DIY suspendedhatch did a great write up ive done them myself before i ever came to this site, and its not alot involved, id recomend getting a haynes manual for an in hand refrence while your doing it

and personally i for got to mention before, id stay away from a fram filter at all costs, i recomend a purolator filter, and either mobil clean 5000, castrol gtx, or valvoline for oil, if you run synthetic go Castrol Syntec or Mobil 1 buts thats my .02..

forcefedEG wrote:pvc valve <- very over looked for a 3$ part

If this hasn't been changed (which most likely it hasn't) do it, It will help clean up your emmisions and increase your mpg and its easy/cheap

change your fuel fliter too, its really easy to do too

94_jdm_ferio wrote:change your fuel fliter too, its really easy to do too

i knew i forgot something and thats normally one of the first things i do when i get a new honda lol

Like I've said, im new to B series. I will try to adjust the valve lash on my b16 but im not really sure about the specs.
Ive seen
Intake- 0.007-0.009
Exhaust- 0.009-0.011
&
Intake- 0.006-0.007
Exhaust- 0.007-0.008
I have a b16A

chilango41 wrote:Intake- 0.006-0.007 Exhaust- 0.007-0.008

those are the specs you need

Got the fuel filter in, spark plugs, oil filter, oil and PCV valve done today

Sunday im going to do the valve lash