- Fri Feb 05, 2010 10:30 am
#173420
Thanks guys.
I will get some proper pics up soon, when I can drive to a good location.
Why would you wana trade NY for the UK?? It shouldn't be called England, it should be called Rain-land. I just hope we have a better summer this year. Last year we had about a week or two of summer weather.
haha
- Fri Feb 05, 2010 2:14 pm
#173438
Anywhere but here. pays loads of tax for nothing in return (yeh we have free hospitals but there crap and they are talking about closing down alot of the) also the government has completely mucked up this country, and we just dont even seem to have a culture of our own we just accept everyone elses that waltz into the country. even if it conflicts with or laws. i could go on and on man loll.
- Tue Feb 09, 2010 9:56 pm
#174342
Picutres Finally (NIGHT PHOTOS TAKEN THIS EVENING)
I Apologise how grainy the pictures are. Im only using a 8mp phone camera. I really need something better, but I hope these show a better portrait of the car.
Thanks guys. Next thing Im doing Is sorting the front end out. The bumper mount has dropped due to a bump the previous owner has had.
For the moment since having the car I've:
1. Took off the but ugly wing
2. changed the Timing belt and water pump (as the pump had it, and the belt was hella loose)
3. Today I cleaned out the IACV to resolve my fluctuating idle problem.
...and as I said a trip to the body shop is next.
I Apologise how grainy the pictures are. Im only using a 8mp phone camera. I really need something better, but I hope these show a better portrait of the car.
Thanks guys. Next thing Im doing Is sorting the front end out. The bumper mount has dropped due to a bump the previous owner has had.
For the moment since having the car I've:
1. Took off the but ugly wing
2. changed the Timing belt and water pump (as the pump had it, and the belt was hella loose)
3. Today I cleaned out the IACV to resolve my fluctuating idle problem.
...and as I said a trip to the body shop is next.
- Sun Feb 21, 2010 10:31 pm
#176823
Not done alot to the car.
concentrating on my career atm alot so not much has been going into the car. just getting me to work and back.
going to give it a good service soon and then i will be sorting out the body work soon as poss.
thanks for looking people
concentrating on my career atm alot so not much has been going into the car. just getting me to work and back.
going to give it a good service soon and then i will be sorting out the body work soon as poss.
thanks for looking people
- Tue Jul 06, 2010 11:27 pm
#203418
Not been on here in AGES.
Moved out with my girl and did not end well. you no the story guys im sure.
anyway build is back on track
Bumper and Bonnet on:
and my recent progress on some undersealing:
Also have some temp bucket seats (bit gash black and blue but better than stock and too cheap to pass up)
So this is where I am at currently. Will be obtaining more parts before it goes to my Dads body shop for revamp (Core support and arches and DC2 Spoiler)
Some more work on the arches i got done after work today as it was cool and needed something therapeutic to chill me out
.
That's the driver's front and rear done.
Then the same evening I come across these which a local good friend was selling, which I snapped up at a good price there and then.
Pic from in the boot
262's with calipers hubs, disk (going to replace with 282s and the mountings).
will be a nice easy swap.
These will be refurbed and cleaned up, fitted with new brake lines, pads and discs.
What I got done today:
1. Dismantled Callipers and discs from hubs
2. Cleaned Hubs and top ball joints, arms etc, and also calipers
3. Hamerited the Hubs, arms and joints
Pics of my progress. Calipers are going to be [COLOR="Yellow"]Yellow[/COLOR]
Cleaned:
Painted (though I will be putting on another coat):
Plans for the brakes
282 Discs 4x100 so prob MG ZR -S Grooved Disc
Aaaaaand Im going to start a search for NSX calipers
next is to get all of my body parts together before I take the car to my dads garage.
1. DC2 Spoiler
2 x2 Rear Arches
3. Core Support
Moved out with my girl and did not end well. you no the story guys im sure.
anyway build is back on track
Bumper and Bonnet on:
and my recent progress on some undersealing:
Also have some temp bucket seats (bit gash black and blue but better than stock and too cheap to pass up)
So this is where I am at currently. Will be obtaining more parts before it goes to my Dads body shop for revamp (Core support and arches and DC2 Spoiler)
Some more work on the arches i got done after work today as it was cool and needed something therapeutic to chill me out
.
That's the driver's front and rear done.
Then the same evening I come across these which a local good friend was selling, which I snapped up at a good price there and then.
Pic from in the boot
262's with calipers hubs, disk (going to replace with 282s and the mountings).
will be a nice easy swap.
These will be refurbed and cleaned up, fitted with new brake lines, pads and discs.
What I got done today:
1. Dismantled Callipers and discs from hubs
2. Cleaned Hubs and top ball joints, arms etc, and also calipers
3. Hamerited the Hubs, arms and joints
Pics of my progress. Calipers are going to be [COLOR="Yellow"]Yellow[/COLOR]
Cleaned:
Painted (though I will be putting on another coat):
Plans for the brakes
282 Discs 4x100 so prob MG ZR -S Grooved Disc
Aaaaaand Im going to start a search for NSX calipers
next is to get all of my body parts together before I take the car to my dads garage.
1. DC2 Spoiler
2 x2 Rear Arches
3. Core Support
- Thu Nov 25, 2010 4:53 pm
#224630
Wow you really have been busy good to see you keeping it clean.
Your not to far from me I live in Harlow, did you say your dad has a spray shop??? this might be important information for me to have lol, as really wanna go for a change on my coupe.
Your not to far from me I live in Harlow, did you say your dad has a spray shop??? this might be important information for me to have lol, as really wanna go for a change on my coupe.
- Page 2 of 3
- 1
- ,
- 2
- ,
- 3