- Fri May 14, 2010 9:14 pm
#194300
Got my MOT today. No problems
Full progress:
http://www.raceminded.com/forum/viewtopic.php?f=7&t=749
Sneak:
B is overrated
Full progress:
http://www.raceminded.com/forum/viewtopic.php?f=7&t=749
Sneak:
B is overrated
- Sat May 15, 2010 12:27 pm
#194418
sick!
how much do they weigh? Can they be used on the street, do they have the impact beam in them?
sick!
how much do they weigh? Can they be used on the street, do they have the impact beam in them?
Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage
- Sat May 15, 2010 3:03 pm
#194441
No there is no impact beam
Thinking of adding them or to make some adjustments to my cage
Weight needs to be measured but I need some polycarbonate windows first.
B is overrated
teal_dx wrote::o
sick!
how much do they weigh? Can they be used on the street, do they have the impact beam in them?
No there is no impact beam
Thinking of adding them or to make some adjustments to my cage
Weight needs to be measured but I need some polycarbonate windows first.
B is overrated
im jealous 
- Wed May 19, 2010 7:49 am
#195261
Dude!!!
Never seen kevlar doors before, are they custom made? Because the only company i know is Seibon and they only do CF doors!
Never seen kevlar doors before, are they custom made? Because the only company i know is Seibon and they only do CF doors!
- Fri May 21, 2010 6:18 pm
#195963
^^ no custom but seibon can maek them out of kevlar for instance. I don't know where these came from.
Due to 2 accidents involving my daily Ford Focus and my girls del sol I had no time to spend on the civic. I'm well but my daily is totaled and the del sol has a dent worth $800 repair costs.....
Nevertheless:
This stuff is used to make the mold come loose after the mold is hardend. Just wax in wax out like you would do to make the car shine:
Stuff I need:
-resis
-harderener
-latex gloves
-poly fabric
-cups
-etc
Just mix some hardener and resin en "paint" the part. Put some fabric and "paint" again
Put some plastic over it and tape it firm
[
Wait for it:
2nd part
Just to show you these doors aren't plug and play:
This is the OEM door with all sorts of ledges to put the rubbers in. My doors don't have any ledges so I did this:
I used the OEM clips in the OEM doors.
Also had to cut some parts of the rubber to make it fit:
The outer doorrubbers need to be glued.
B is overrated
Due to 2 accidents involving my daily Ford Focus and my girls del sol I had no time to spend on the civic. I'm well but my daily is totaled and the del sol has a dent worth $800 repair costs.....
Nevertheless:
This stuff is used to make the mold come loose after the mold is hardend. Just wax in wax out like you would do to make the car shine:
Stuff I need:
-resis
-harderener
-latex gloves
-poly fabric
-cups
-etc
Just mix some hardener and resin en "paint" the part. Put some fabric and "paint" again
Put some plastic over it and tape it firm
[
Wait for it:
2nd part
Just to show you these doors aren't plug and play:
This is the OEM door with all sorts of ledges to put the rubbers in. My doors don't have any ledges so I did this:
I used the OEM clips in the OEM doors.
Also had to cut some parts of the rubber to make it fit:
The outer doorrubbers need to be glued.
B is overrated
- Sat May 22, 2010 5:47 am
#196111
x2