- Mon Jun 28, 2010 10:24 pm
#202390
You'll need about ten o-rings. Not sure but you might be able to get an o-ring kit at your local auto parts store or, failing that, the Honda dealer. Everywhere a line connects to a major component will have an o-ring. Additionally, you'll need some very small o-rings if you decide to replace the expansion valve inside the evaporator. I decided to go this route when I installed my A/C, figuring that it would never be easier to replace the valve than when I had the evaporator unit sitting on my work bench.
Don't forget to give each o-ring a coating of ester oil before installation!
Don't forget to give each o-ring a coating of ester oil before installation!
