MATTE BLACK Vinyl eg6 Build Time for BOOST!

Post YOUR Hatchback here
 Reply
User avatar

By mitch6
- Mon Sep 10, 2012 4:39 am #315356 more photos

Image
Image
Image

Finally, time to show off some V-tec and tire sqeeks on each gear :lol: :lol:

This is with my B16A, JDM Genuine Honda 98 spec ITR headers, yonaka resonator and yonaka catback exhaust!

let me know what you guys think of the sound :thumb:

(Click to view video, it will re-direct you)

Image
User avatar

By mitch6
- Tue Oct 02, 2012 6:08 am #316980 my girlfriend and I bought this to share for the winter while we park our cars 8)

Image
Image

Its completly stock! with the D16z6 motor. Going to be doing a few mods to it, nothing too much, here is the mods we plan to have done soon:

1. keyless entry, remote start & alarm
2. Fog lights
3. 35% smoke window tint all windows
4. mud gards and an OEM front lip
5. bi-xenon HIDs, 4300K bulbs
6. new CD deck with USB port
7. Tenzo R cold air intake with K&N filter (Found one in the junk yard, mint!)
8. Complete power polish
9. Most importantly, a complete tune up and replace all seals!

the moto has 203,xxx Km's on it, and it runs very smooth, picked it up for $1400 and we are very excited to be driving it this winter :thumb: :thumb:
User avatar

By mitch6
- Mon Oct 15, 2012 5:02 am #317952 some new updates on my ej1 winter car!

finished doing a full tune up, changed most of the engine seals and gaskets. Sea foamed the car, installed a cold air intake I found at the junkyard :hehe: and painted the exhaust heat sheild and engine valve cover gloss black.

Also installed keyless entry, remote start and alarm :thumb:

Image

And started to polish the paint since it was pretty scratched up lol... the paint turned out really nice, its a metallic or pearl black, factory paint lol

Image
Image


-----------------------------------------------------------------------------

now for my hatch updates:

Put my winter rims back on, need to raise it now haha!! (Wont be driving much in the winter but just incase :wink: )

Also **FINALY** got my candy red BEAKS lower tie bar :thumb: :thumb:

Also installed my fujitsubo rm01a axle back exhaust and I am considering burnning the tip. Not too sure yet :?

Image
Image
Image
Image
Image
User avatar

By mitch6
- Mon Nov 19, 2012 6:55 am #320285 Finally got my JDM Power folding mirrors, just needs to be plasti dipped :thumb:

I actually have two sets of power folding mirrors, on set I picked up is power folding + heated (I will be selling this rare goody) and the other one will be going on my car :thumb:

first need to focus on my midterm, then I can get back to working on my eg 8)
User avatar

By familyEGuy23
- Mon Nov 19, 2012 5:49 pm #320300 Dope :thumb:
Most people would want your winter car as a daily driver
Btw how hard was it to install your alarm?
User avatar

By Punksz6
- Mon Nov 19, 2012 9:18 pm #320315 Nice :thumb:
User avatar

By mitch6
- Tue Nov 20, 2012 3:36 am #320332
familyEGuy23 wrote:Dope :thumb:
Most people would want your winter car as a daily driver
Btw how hard was it to install your alarm?


whoever buy's my coupe in the near future if I don't decide to use it for next winter will be a lucky person, I just fin taking the front two seats apart and installed heated seat elements on both cushions, so nice in the winter :thumb:

As for the key-less entry, alarm and remote start, its quite easy, just very time consuming and messy lol. You have to buy some universal door lock actuators and mount them onto your door panel by drilling in some holes where the screw brackets can be mounted. The tricky part is to find an area to mount them without having the door panel inter-fear with the way the actuator functions. The rest is simple wire splicing under the dash. And finally the siren is wired from your engine bay through the firewall into the control box of the system.

If you have a full day to sit down and get the job done its not so bad, and man it is awesome to have :D The system I have in my hatch is old, its the SCYTEK G20 kit, and in my coupe its is the SCYTEK G55 (only can be used on auto transmission because of the remote start in the kit)

If you choose to install one, let me know if you have further questions, I will be more than willing to help!


With that aside, the next thing I will be posting is my new Bi-Xenon Retrofit I recently did, hehe, its pretty crazy in my opinion 8) Took me forever to do however.... But I will have to let those pictures wait for now lol, and with that said, my old retrofit (seen in my signature) will probably be for sale soon :twisted:
User avatar

By mitch6
- Sun Nov 25, 2012 10:57 am #320852 I just finished installing my new JDM Integra Type - RX Genuine Pedals!

Here is how they look, BNIB 8)

And now in the car! (Some modifications were required seeing as it is a RHD part, I didn't think so at the beginning but I was clearly in for a surprise once I got started lol...)

I love the way they look! just one last modification is needed as the accelorator pedal is sitting slightly too high, I need to put the rubber stopper from my eg6 pedal into the ITR pedal shaft, not too hard to do lol

Image
Image
Image
Image
User avatar

By Punksz6
- Tue Nov 27, 2012 5:41 pm #321010 Very Nice work on the pedals!! Also cant wait to see the new Retro-Fits!! :thumb:
User avatar

By mitch6
- Tue Nov 27, 2012 5:55 pm #321011
Punksz6 wrote:Very Nice work on the pedals!! Also cant wait to see the new Retro-Fits!! :thumb:


Hehe 8) new retrofit is done,.just have not had time to take good pics or post them, but they will be posted soon :thumb:
User avatar

By mitch6
- Mon Jan 21, 2013 6:16 am #324537 FINALLY! Sorry for the HUGE delay I had with an update....

here is the new morimoto FX-R 3.0 retrofit I recently completed a few months back:

ImageImage
Image
Image


These are once again some glass SPEC-D headlights that I took apart and blacked out the housing with some satin black paint. Then I retrofited some 3.0 Morimoto FX-R projectors. I customized the projectors a bit by giving the len a "Red look" but the light output is 100% OEM 4300K white light :thumb:

upcoming mods:

1) Swap out my brake lines with stainless steel braided brake lines
2) Install my red Z-speed lower front tie bar
3) install the JDM power folding mirrors I bought awhile back after I have converted the internals into USDM mirrors.

And the one other recent thing I have had some was changing out the axle back exhaust again! I now have a Fujitsubo Legalis R axle back, I will post pics soon!

Let me know what you all think? Thanks! :thumb: :thumb:
User avatar

By Fada Blayne
- Mon Jan 21, 2013 12:45 pm #324547 :thumb: :thumb: :thumb:
User avatar

By TrailerTrash
- Tue Jan 22, 2013 4:24 am #324591 looking good :thumb:

lets see some nice night shots with those lights on :hehe:
 Reply
Return to Your Ride - Hatchback