Civic-EG.com Forum 3.3.1

- Sun Jun 15, 2014 2:14 am #346454 I think your car would look awesome with a gold and blue color scheme.
Glwb!

93 EG8 D15B7
My Build Thread:
viewtopic.php?f=61&t=28131
Instagram: @Stance_God

- Sun Jun 15, 2014 2:47 am #346455 I was thinking blue with blue accents and rear gold control arms

- Sun Jun 15, 2014 2:53 am #346456 Picked up some ls meshies that need a lot of work. I finished 2 of them but starting to regret getting them, hopefully they turn out ok, I'm painting then gold, also broke a peice of my socket trying to get head studs off, also grabbed a teggy dash today but so hard to install lol not sure how to wire things up an get cluster working

- Sun Jun 15, 2014 2:55 am #346457

- Sun Jun 15, 2014 4:38 pm #346470 Im almost to scared to try the dash swap lol i want cluster to fully work but im bad with electrical

- Mon Jun 16, 2014 2:21 am #346481 This is the link that I used to do my Integra dash swap in my first hatchback.
Everything worked fine.
http://m.honda-tech.com/showthread.php? ... styleid=18
Good luck with the swap

- Tue Jun 24, 2014 8:22 pm #346710 What's up guys, so I'm still having trouble finding the right size socket to take the arp head studs off lol and I'm also having a hard time taking the old intake manifold gasket off! Any ideas?! I want to get the head gasket done, im also going to order a gates timing belt,water pump and tensioner kit next week.. But I live in a building and the motor is on a tire lol the clutch is on and I can't get the pulley off. Please help!




I also re did the valve cover and grabbed some washers and spike bolts. I highly recommend the wrinkle paint!

- Wed Jun 25, 2014 12:47 am #346714 Anyone ?

- Wed Jun 25, 2014 4:54 am #346720 I cant answer your questions lol but I can say that the valve cover looks awesome!! Those bolts look awesome too!

old hatch thread: http://civic-eg.com/viewtopic.php?t=28400

NEW sedan thread: http://civic-eg.com/viewtopic.php?t=29112

- Wed Jun 25, 2014 5:32 am #346724 did you try aircraft cleaner to remove the paper gasket on your intake side?

strong stuff and should be able to get them at your local auto store under the paint section.

- Wed Jun 25, 2014 4:09 pm #346739 Iv actually looked everywhere for that aircraft paint remover/cleaner but it's almost like they don't sell it here in Canada lol someone said carb cleaner and a razor blade should work so I'm gonna try that today

- Wed Jun 25, 2014 5:40 pm #346743 That paper gasket was a bitch to remove, A square block of wood and 60 grid sand paper, just hold the block straight and flat it out. About the studs, usual is 14mm standard, can you make a picture of that, it could be 14mm 12corners or 1/2 12corners,13mm 12corn...

cIvic eg4 ImpoRt D15b dUal carbs!
D16z6 conversion going on.

- Wed Jun 25, 2014 7:09 pm #346744 I can't really take a pic as the studs are in the head and I only have an iphone to take pics with lol the 1/2 12 point socket fit but I broke the extension peice because it's so small

- Thu Jun 26, 2014 6:33 am #346759 Buy a deeper socket, 3/4 inch

cIvic eg4 ImpoRt D15b dUal carbs!
D16z6 conversion going on.

- Thu Jun 26, 2014 3:01 pm #346766 Nice updates dude!

1995 DX Sedan - my really slow project... and definitely lovin' it.