- Sun Nov 30, 2008 9:03 pm
#81133
Thanks 
To bad my very old laptop need a replacement. Or else the car should have been complete by now ;) I just had to order one of these and they are quite pricey :S
As my first project i will make a garage movie about the Civic
To bad my very old laptop need a replacement. Or else the car should have been complete by now ;) I just had to order one of these and they are quite pricey :S
As my first project i will make a garage movie about the Civic
Best Regards, Johan
new mac book! CNC'ed out of solid aluminum! 
- Tue Dec 23, 2008 8:24 pm
#85157
Washed my daily driver this evening and let it dry in the garage since it is -17 degrees celcius outside 
Meanwhile i did some work on my car
Click on picture for bigger version
First, jackstands for the rear
Stock Civic
I had these replaced this summer and the mechanic screwed it up. The bushings where so lose they fell right off! This and +1mm toe out = wobbly wobbly
One lca down. Simple job. Three bolts.
Function 7 lca installed. A bit fiddly to do this when you are alone actually since you need to push and get the bolts in to the holes at the same time.
Both lca installed. Still stock swaybar and no ASR.
Stock 16mm swaybar removed
ASR plate installed. Simple bolt on. A great tip is to install the plate BEFORE lca´s since the inner lca bolt goes through the plate. And the back piece is kind of hard to get in place with lca mounted.
Now we are talking
Another view
Blox endlinks. Not sure how to install these properly. Any ideas?
Close-up
Backside
ITR 23mm vs stock ESi 16mm
One problem i came across you see inside the red cirkel. The bolt head is not in the center so my tools where to thick to fit. I wonder if the hardware store is open tomorrow
Meanwhile i did some work on my car
Click on picture for bigger version
First, jackstands for the rear
Stock Civic
I had these replaced this summer and the mechanic screwed it up. The bushings where so lose they fell right off! This and +1mm toe out = wobbly wobbly
One lca down. Simple job. Three bolts.
Function 7 lca installed. A bit fiddly to do this when you are alone actually since you need to push and get the bolts in to the holes at the same time.
Both lca installed. Still stock swaybar and no ASR.
Stock 16mm swaybar removed
ASR plate installed. Simple bolt on. A great tip is to install the plate BEFORE lca´s since the inner lca bolt goes through the plate. And the back piece is kind of hard to get in place with lca mounted.
Now we are talking
Another view
Blox endlinks. Not sure how to install these properly. Any ideas?
Close-up
Backside
ITR 23mm vs stock ESi 16mm
One problem i came across you see inside the red cirkel. The bolt head is not in the center so my tools where to thick to fit. I wonder if the hardware store is open tomorrow
Last edited by Mordiiax on Tue Dec 23, 2008 8:44 pm, edited 1 time in total.
Best Regards, Johan
- Tue Dec 23, 2008 8:42 pm
#85158
Nice, pappaen til Peter forsberg var Trener for laget jeg holder med. Vålenga hockey
Peter forsberg, en av De best i Nhls historie
Fu...k 14- grader. det er ikke "skoi"
Mordiiax wrote:Hehe, i live about 90 kilometers from Peter Forsbergs hometown. I have met him several times and got a few autographs
Nice, pappaen til Peter forsberg var Trener for laget jeg holder med. Vålenga hockey
Peter forsberg, en av De best i Nhls historie
Fu...k 14- grader. det er ikke "skoi"
Only Thing thats R whit ma eg,
Is the Rust
Type-R :-P
Is the Rust
Type-R :-P
- Tue Jan 06, 2009 12:41 pm
#87200
The black crap is the sound deadening.
Get a chisel and some dry ice on it and go to town on it and it'll come off eventually.
Plenty of elbow grease once it's out to clean it up and you'll be set
Get a chisel and some dry ice on it and go to town on it and it'll come off eventually.
Plenty of elbow grease once it's out to clean it up and you'll be set
