4k shifting good or bad for my engine?

Topics that apply to all 92-95 civics
 Reply

4k shifting good or bad?

5
71%
0
N/A
2
29%
0
N/A
  • Total votes : 7
User avatar

4k shifting good or bad for my engine?

By xwhitchx
- Sat Jul 09, 2011 8:32 am #262932 Well I have put a new jdm d15b vtec engine in to my car. It has all new seals and gaskets all the way around. And a rebuilt dx tranny with 1k mils on it so far. A 8lb flywheel with a stage 1 clutch. I'm still using my p06 ecu so no vtec. I have been driving this car slow and shifting at 3-4k rpms and driving around in 5th as much as I can.

I want to know if this is good or bad for my engine. I can tell from driving like this that I don't go through as much gas at all lol. :P

I would just like some imput.

By EJ1_MK
- Sat Jul 09, 2011 8:58 am #262933 You will be fine driving it like that, you need to get that ecu in though so you can make sure vtec works honda recommends to run the motor into vtec just to clean it out.
User avatar

By TrailerTrash
- Sat Jul 09, 2011 5:07 pm #262954
EJ1_MK wrote:You will be fine driving it like that, you need to get that ecu in though so you can make sure vtec works


I second this. get a p28 or a p08

EJ1_MK wrote:honda recommends to run the motor into vtec just to clean it out.


my new excuse for giving people behind me a smoke show :thumb:
User avatar

By xwhitchx
- Sat Jul 09, 2011 9:17 pm #262969 I have a p28 but it will not start the car. And it doesnt look burned at all so idk whats up with it. can anyone fix it? or got one for sale?

By EJ1_MK
- Sat Jul 09, 2011 11:19 pm #262990 do you have a local shop that tunes with chrome or neptune? take it to them they might be able to fix it or put a tune on it that will start the car.
User avatar

By TrailerTrash
- Sun Jul 10, 2011 12:03 am #262993 how do you know its the ecu thats stopping the car from starting?

By EJ1_MK
- Sun Jul 10, 2011 1:23 am #263000
TrailerTrash wrote:how do you know its the ecu thats stopping the car from starting?


If it starts with a p06 ecu and not with the p28 then which part would you would thing would be bad?
User avatar

By TrailerTrash
- Sun Jul 10, 2011 3:09 am #263014
EJ1_MK wrote:
TrailerTrash wrote:how do you know its the ecu thats stopping the car from starting?


If it starts with a p06 ecu and not with the p28 then which part would you would thing would be bad?


my mistake
User avatar

By xwhitchx
- Sun Jul 10, 2011 5:58 pm #263065 Well I got a p28 ecu last night and every thing works fine.

As for the on I have, there has to be something wrong with it.

I pugged the new ecu in and drove home with it plugged in.
User avatar

By xwhitchx
- Sun Jul 10, 2011 10:23 pm #263093
familyEGuy23 wrote:Vtec kicking in now? :D
yeps btw what is the red line on the p28?
User avatar

By TrailerTrash
- Mon Jul 11, 2011 3:16 am #263123
chrono404 wrote:7200rpm


I have a p28 and a JDM D15B and it redlines at 7800 :?
User avatar

By Ajax1989
- Mon Jul 11, 2011 3:34 am #263127
TrailerTrash wrote:
chrono404 wrote:7200rpm


I have a p28 and a JDM D15B and it redlines at 7800 :?


diff motors prob

By EJ1_MK
- Mon Jul 11, 2011 8:34 am #263149 p28 is a strange computer mine goes to 6200, my friends goes to 7200 in his ex and the one I had for my 98 coupe went to 7600 before I chipped it.
 Reply
Return to Chassis - General