y8 intake

D15, D16, D17 and Mini-Me swaps
 Reply

y8 intake

By civic_boy94
- Wed Jul 27, 2011 2:14 am #265144 i wanna put a y8 intake from a ek civic on my z6 i have a strong belief tht it would give my engine a bettr upgrade (intake wise ) wht do yu think ???
User avatar

By 603 jdm
- Wed Jul 27, 2011 2:32 am #265146 the y8 Intake manifold does have bigger runners i do believe, if you look under the diy section under the mini me swap i think it is teal_dx shows info about the y8, i think 96-97 is the one that wouldnt need any modification because i think 98 and up had a cold start sensor on it , but u might be able to just cap it somehow.
User avatar

Re: y8 intake

By RWMIII
- Wed Jul 27, 2011 5:01 am #265164
civic_boy94 wrote:i wanna put a y8 intake from a ek civic on my z6 i have a strong belief tht it would give my engine a bettr upgrade (intake wise ) wht do yu think ???


The y8 manifold has a larger plenum for quicker throttle response and somewhat beter midrange-topend power. The y8 manifold is also better for boost.

So yes, it is a good upgrade.
User avatar

By teal_dx
- Wed Jul 27, 2011 1:26 pm #265186 99-00 y8 have cold start assist and will need to have 4 little holes filled in. 96-98 is ready to bolt on. Be sure it is from a manual car, not auto. (auto's had the iacv built into the throttle body instead of on the back of the manifold)
User avatar

By 603 jdm
- Thu Jul 28, 2011 1:11 am #265277 not to jack your thread but woohoo earned a wrench! i love being helpful.
User avatar

By TrailerTrash
- Sat Jul 30, 2011 3:35 am #265552 There is an article in this month's Import Tuner on page 76 about adding a y8 intake manny and Blox throttle body. interesting article :thumb:
User avatar

By 603 jdm
- Tue Aug 02, 2011 12:47 am #265873 their adding it to a b7?
User avatar

By TrailerTrash
- Tue Aug 02, 2011 2:22 am #265876
603 jdm wrote:their adding it to a b7?


no to a z6
User avatar

By RWMIII
- Tue Aug 02, 2011 4:17 am #265883 i stopped in the store after i saw your post about it being in import tuner. I have to say that i am not impressed with those dyno numbers, they would be even worse without the tb they added. and if they are running hondata i believe it was, then they tuned it obviously. So I wonder what real world stock ecu, y8 intake mod would add to z6? not much. now if it were boosted, that would be a diff story. :thumb:
User avatar

By TrailerTrash
- Wed Aug 03, 2011 1:40 am #265962
RWMIII wrote:i stopped in the store after i saw your post about it being in import tuner. I have to say that i am not impressed with those dyno numbers, they would be even worse without the tb they added. and if they are running hondata i believe it was, then they tuned it obviously. So I wonder what real world stock ecu, y8 intake mod would add to z6? not much. now if it were boosted, that would be a diff story. :thumb:


to me, not enough to make it worth it. but as you said and the article said, it paves the road smoother for forced induction :thumb:
User avatar

By Ajax1989
- Wed Aug 03, 2011 3:05 am #265973 one thing everyone mention.. is the hondata s300 for that mag build
i saw it too...

u can slap parts on ur car all day... but without the proper tune u will not see much of an increase..

but the y8 manifold is like the type-r to the d serise
there a good stock upgrade... :thumb:
User avatar

By RWMIII
- Wed Aug 03, 2011 3:11 am #265975
94_jdm_ferio wrote:u can slap parts on ur car all day... but without the proper tune u will not see much of an increase..


why cant more people understand this :?
User avatar

By Ajax1989
- Wed Aug 03, 2011 3:15 am #265977
RWMIII wrote:
94_jdm_ferio wrote:u can slap parts on ur car all day... but without the proper tune u will not see much of an increase..


why cant more people understand this :?


idk?? cuz there just on the bandwagon.. and actually dont kno
how to work on motors, let alone know how they work

anyone can swap motors.. not everyone knows how to make a z6 with i/h/e on a s300 put b16's and ls's in there place.. just sayin
User avatar

By RWMIII
- Wed Aug 03, 2011 3:28 am #265983
94_jdm_ferio wrote:
RWMIII wrote:
94_jdm_ferio wrote:u can slap parts on ur car all day... but without the proper tune u will not see much of an increase..


why cant more people understand this :?


idk?? cuz there just on the bandwagon.. and actually dont kno
how to work on motors, let alone know how they work

anyone can swap motors.. not everyone knows how to make a z6 with i/h/e on a s300 put b16's and ls's in there place.. just sayin


and most dont realize the time and money it takes to properly build a car. Or even DRIVE it for that matter :lol: Yes Honda's are cheap, and somewhat easier to build than other manufacturers but common sense can go a long way. Most would rather listen to their buddy than someone who has been in this game for many years.
 Reply
Return to D Series