- Wed May 09, 2012 1:55 am
#304332
Thanks for the comments.
I got the throttle cable and still had clearance issues so i made a bracket to attach to the OEM throttle cable bracket and it worked with no problems. It was about 9pm when i got everything put together. I cranked her up and started right up...but the idle was all over the place. jumping from 1k to about 3500 rpm. I didn't even try to start to adjust anything or find what the problem was because of the time and the amount of noise. Will post some more pictures of it all done when i get some time. Any ideas on what it could be to help me out so i dont piss off to many neighbors
New parts installed if this helps narrow it down. Intake manifold, throttle body with new TPS, Throttle cable, FPR relocator, fuel rail, new gaskets for the injectors and IM and TB. Thanks in advance.